dune,

Click HERE to view the conrod you are looking for.

Here is some information from the workshop manual in the parts list and manuals area of the forum.

To adjust points
- Adjust points gap to 0.45 � 0.50mm (.020�) as follows
(see Breaker point setting table).
- Turn engine to bring cam heel to widest opening point.
- Insert feeler gauge and with the aid of a screwdriver
fitted in slot �A� (Fig 11), gently close points until a �drag�
is felt on the feeler.
- Tighten points securing screw.

cheers2

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.