Well, waiting for the replacement I ordered which will match the hole depth better I feel, I put in an old NGK I found in my bits and pieces,
, probably 20+ years old lying around, it is 5/8 hex, it is 19mm reach, looks about same centre-electroide heat-range length, but it is some series NGK which has a thin needle-pointed centre electrode.

the one I took out, which may or may not be OE, was ARCHER A941P..

Anyway, thing started 1st pull, ran faultlessly..stutter/cough/miss when sudden throttle-up and black smoke-puff seems gone even.

Makes me reluctant to now try new one I ordered on Temu for $2.90 all-up which is en-route....

Attachments
DSCF3589.JPG (29.26 KB, 41 downloads)
DSCF3590.JPG (29.62 KB, 40 downloads)
DSCF3591.JPG (29.87 KB, 40 downloads)
DSCF3592.JPG (33.42 KB, 40 downloads)
Last edited by BriggsHandy; 13/12/24 04:06 PM.