The impact driver arrived, it was too big, but got a couple of screws loose with it. Tapped a phillips head screw and the lug broke off, dosen't matter. I sprayed the motor with penetrating spray every 3 days.... for last week..... Managed to undo some allen head bolts.....on the shaft to motor join. I cut a slot in the allen head on the pull starter and it loosened, then did the other three...... lucky they all loosened, but were rusty, the penetrating fluid never got in..... Rust everywhere , hit it with mini wire brush on a drill, then Boston penetrating spray. The job is starting to turn my way. cheers speedy
........................Keep your blades sharp......................
