OutdoorKing Repair Forum Forums Finding and Swapping Wanted Fuel tap

Hi all
I'm chasing the screw which goes in the side of the brass fuel tap on my Victa Corvette. This screw prevents the whole centre from coming out when the tap is pulled out to the on position, alternatively if you have a complete tap I would be happy to buy that.

Thanks
wce

Hello wce shaun here send us a picture of it i might have a spare tap lying around if its the same if it is i can post it to you no charge

Shaun

Hi Shaun
Many thanks for the contact, pictures attached, happy to pay for the part if you have one.

Regards
wce

I've had to make a similar screw for an Amal carburettor. You find a screw with the right thread, cut it to length and file off the threads from the tip. It takes a while to get it right though.

Thanks for the pictures i will have a look at mine and let you know