OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Walk Behind Lawn Mower Frames Question On Scott Bonnar Cylinder Mowers Scott Bonnar 65

Hi all I was just hoping someone might be able to help me out, in letting me know where I would be able buy a couple of these set screws. They are for the pivot on the front roller on a model 65. Cheers for any help.

As far as model 65 is concerned, you'll really be pushing it to find any spares whatsoever. You may find that you'll have to get an engineer to turn some up from stock Hex bar.

Cheers,
BB.

I would try your local bolt/ fastener shop (the smaller guys usually stock weird sizes/ shapes), Possibly just get a hex bolt with a spacer/ few washers

Hi Millzy,

These are a specialist item and its actually called a pivot bolt, these are much the same as the one used on the Model 45 for holding the Reel bearing carrier on each side.

Cheers,
BB.

Thanks guys. I did try local bolt supplier before I posted but no luck so I might have to get some made up. Thanks anyway

Hi ainsley01
Many thanks for the great images.

These pivot bolts will be made-to-order these days.
But they should be fairly cheaply re-made.

Please let us know how you go.

--------------------------
Jack