Need help?


Search OutdoorKing-Forum by entering Key Words Below



Who's Online Now
1 members (1 invisible), 2,420 guests, and 284 robots.
Key: Admin, Global Mod, Mod
Newest Topics
Victa Super 24/600
by Doug - 07/03/26 07:07 PM
Eaton Model 6/7
by mm-mowers - 06/03/26 08:27 AM
Early Morrison rotary mower
by Hawkeye - 01/03/26 10:20 AM
Rebirthing a Honda 12 volt solenoid
by MowingManiac - 19/02/26 09:57 PM
Victa SPX 2342 - Blue Model - Belts Help
by Steve_2012 - 18/02/26 10:24 AM
GXV390 chaging oil with vacumm pump.
by leslloyd - 12/02/26 05:44 PM
Topic Replies
Gardenline 21" Self Propelled Mower @ Aldi.
by MowingManiac - 10/03/26 08:32 PM
Early Morrison rotary mower
by maxwestern - 07/03/26 10:21 PM
Victa Super 24/600
by Doug - 07/03/26 07:07 PM
Eaton Model 6/7
by maxwestern - 06/03/26 08:42 PM
Add electric power to push reel?
by maxwestern - 06/03/26 08:34 PM
B&S 20hp hunts through the rev range.
by mm-mowers - 06/03/26 08:32 AM
Victa SPX 2342 - Blue Model - Belts Help
by Bruce - 02/03/26 09:37 PM
Rebirthing a Honda 12 volt solenoid
by NormK - 22/02/26 02:31 PM
Greenfield Drive belt keeps twisting
by Bruce - 20/02/26 12:02 AM
Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
Page 2 of 2 1 2
Joined: Jan 2013
Posts: 445
Likes: 1
Qualified Junior
I was curious to know if any other people have had success using the Masport Blade Plate Stiffener Kit for the 4 blade disks (Quad Cuts). They are about $18 off dollars for the kit.

I have seen a fair few of the 4 blade models where the blade plate has cracked around the washer underneath the bolt secured to the PTO shaft. Curious to understand if this bit of kit is a worthwhile investment on refurbished Masports?

Any thoughts would be appreciated.

Thanks

Jaffa

Joined: Dec 1999
Posts: 5,407
Likes: 35
Repair Junkie
****
Originally Posted by Jaffa J
I was curious to know if any other people have had success using the Masport Blade Plate Stiffener Kit for the 4 blade disks (Quad Cuts). They are about $18 off dollars for the kit.

I have seen a fair few of the 4 blade models where the blade plate has cracked around the washer underneath the bolt secured to the PTO shaft. Curious to understand if this bit of kit is a worthwhile investment on refurbished Masports?

Any thoughts would be appreciated.

Thanks

Jaffa

Hi Jaffa,

Masport had some issues with the blade plate cracking on some models. Below is information on what to do.

Attachments
TB85-583314-Contoured-Blade-Disc-Update.pdf (421.31 KB, 17 downloads)
Blade Disc Info

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
Joined: Dec 2017
Posts: 70
Trainee
I posted about this problem a while back... a 2013 made Masport 4 blade mower that cracked the blade carrier around the washer ...I actually welded the piece back in, ground it off and made a larger washer for it... I have since found another one with exactly the same problem.
I have also seen an earlier 2 blade carrier that has done the same thing.. but to be fair , this particular one was not fitted with a flat washer .. The bolt was fitted with a spring washer and was so over tightened that it had a "wad punch effect" on the carrier, starting a crack around the damage.
Just another thing, all the Masports that I have had or seen over the years, all seem to crack the body on the left hand rear side, just forward of the wheel.
Ken

Page 2 of 2 1 2

Moderated by  bigted, Bruce, CyberJack, Gadge, Mr Davis 

Link Copied to Clipboard
Newest Members
MamaBear, AliPike, Evomk2pete, Rosepetal, DF Handyman
17,874 Registered Users
Forum Statistics
Forums145
Topics13,071
Posts107,310
Members17,874
Most Online16,069
Sep 19th, 2025
OutdoorKing Showcase
20 Bucks from FB Marketplace
20 Bucks from FB Marketplace
by Return Rider, February 20
Victa Cortina 2 Shed Find
Victa Cortina 2 Shed Find
by Return Rider, January 25
My Rover Baron 45
My Rover Baron 45
by Maxwell_Rover_Baron, April 16
SHOWCASE - Precision Mowers - 2021
SHOWCASE - Precision Mowers - 2021
by CyberJack, April 14
SHOWCASE – Atco Rotary – Paul C - 2020
SHOWCASE – Atco Rotary – Paul C - 2020
by CyberJack, December 28
HOME |CONTACT US
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Release build 20240826)
Responsive Width:

PHP: 8.3.30 Page Time: 0.062s Queries: 22 (0.055s) Memory: 0.6350 MB (Peak: 0.6747 MB) Data Comp: Zlib Server Time: 2026-03-12 05:58:10 UTC
Valid HTML 5 and Valid CSS