OutdoorKing Repair Forum Forums General Discussion Forum Off Topics VICTA - Choke Control - Can't find another

have I done well. as I only have one of these


or not


i had no spare.

.

I want to mow lawns with this mower but dont want to damage the original choke contol.
Sean.

Chance favours the prepared mind

for my money , i would put a later type filter on it anyway if your going to use it fulltime as they work a lot better , if you have a handle with a hole already drilled it it for a filter up top of them use that and grab a setup off of a later model with a real filter inside .

just what i would do for a daily driver

I am also having trouble finding one of these to go with it

Nothing i have has a 90 degree angle in it.
I dont want to make it look to dodgy.
sean

just use one from a powertorque all of it just take out the cable . not to sure what your wanting too do but if its going to be used , put away the good old choke , use later stuff and it filters better anyway

made the filter out of flyscreen rolled up.

I know its a bit rough but seems to work as it should.
looking for the powertorque hose with the right angle so i dont have to move its clamp as it is rusted on an can not be moved much.
I hope i didnt just confuse yall.
Sean

Hey Sean,

The design is fine, nothing wrong with a bit of initiative. Just make sure you put the internal washer back into the filter housing otherwise that mesh might work its way out and get sucked straight into the engine....:)

And I'd have to agree with The VMan, Maybe throw on a complete power torque unit without the cable, snorkle and all is a good Idea yeah?

thanks Mr 6 , thats what i meant complete snorkle n all the old bushy here had a rover one , works perfect but upto you , easy and it works well .
i would show you but seems it wont upload again

Got a powertorque hose cut to suit.

Thanks for all the ideas.
Sean.
Happy camper. waiting for my lawn to grow.

ooooh ok , geeeeeez...... good though , i was thinking higher , out of dust but allgood works at least .
might like to put a thin wire or cabletie through flyscreen so it stays put hold it in place so it dont get sucked in

I put the internal washer in so the flyscreen wont move.
Sean