I would like to know if parts are still available for a electramac EM 250 chain saw-probably about 10 to 12 years old.I currently require a circlip which holds the chain drive sprocket in position on the drive shaft.I have tried to source one from fastener suppliers but they don't have circlips which are thin enough to fit into the groove on the drive shaft.

any info appreciated

Re: Parts for an Electramac -model EM 250

#5005 05/05/06 08:25 PM

Joined: Dec 1999

Posts: 5,435

Likes: 36

Sydney, NSW, Australia

Bruce

Repair Junkie

bitz,

Here is a parts list that might help.

[Linked Image from i65.photobucket.com]

If you let me know whic parts you require I can try to track them down.

Regards,

Bruce

Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.

Re: Parts for an Electramac -model EM 250

#5006 08/05/06 11:28 PM

Joined: May 2006

Posts: 3

Sydney

bitz

Novice

Hi Bruce The missing bit is part no.31 It would be much appreciated if you were to find one. Thanks for the parts diagram
regards bitz

Re: Parts for an Electramac -model EM 250

#5007 10/05/06 07:31 PM

Joined: Dec 1999

Posts: 5,435

Likes: 36

Sydney, NSW, Australia

Bruce

Repair Junkie

bitz,

Have you tried the CBC bearing company as I am sure that you will be able to get one off them.

Here is their link:

CBC Bearings Then click on suppliers.

Regards,

Bruce

Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.

Re: Parts for an Electramac -model EM 250

#5008 25/05/06 09:59 PM

Joined: May 2006

Posts: 3

Sydney

bitz

Novice

Hi Bruce Thanks for the info. I have not been to CBC yet as I have been laying pavers and the saw has not had a role in this endeavor.
Incidently I saw a Harvey Norman catalogue last week in which was advertised A Mcculloch/electrolux electric chainsaw and a similarly branded petrol blower vac.
regards bitz