|
|
|
0 members (),
3,683
guests, and
518
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Mar 2011
Posts: 34
Novice
|
Hi guys I have a honda GX25 wipper snipper that started to just stop randomly and the last time I went to use it it would start and run for a couple of seconds and then stop??? now it won't start at all??? I have changed the oil twice and checked the air filter and also to make sure it has spark and all is well?? The only thing I can think is it has a low oil sensor or something like that and it is playing up??? Any ideas before I take it to the shop and it costs me an arm and a leg.
Cheers Brenden
|
|
|
|
|
Joined: Jul 2005
Posts: 6,362 Likes: 10
Administrator - Master Technician
|
Hi Brenden, just a thought; have you checked the fuel cap vent? It may be blocked and causing the prob.  
Please do not PM me asking for support. Please post your questions in the appropriate forums, as the replies it may receive may help all members, not just the individual member. Kindest Regards, Darryl 
|
|
|
|
|
Joined: May 2013
Posts: 43
Novice
|
mine dose the same thing i think mine is the carby iv taken the engine apart thinking sticking valve or something has worn all was good i would check the clearances on the valved .08 of a mm is what i set them fuel vent a Deejay said i replaced mine didn't fix mine but yous might have a different problem
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics13,009
Posts106,964
Members17,637
| |
Most Online16,069
Sep 19th, 2025
|
|
|
|
|
|
