|
|
|
1 members (MowingManiac),
1,806
guests, and
584
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Dec 2006
Posts: 2
Novice
|
Ha Bruce i have a victa power torque that wonn't rev above 3200. when i hit long grass it screams. it sounds terable when going from long to short grass .if i disconect the Govoner hose the rev increase to about 3800. I have removed carby and replaced all orings , rubbers and springs what do i do now. regards Ja 
|
|
|
|
|
Joined: Dec 1999
Posts: 5,395 Likes: 35
Repair Junkie
|
ja, Have you replaced the '0'ring under the starter housing? 
Regards, ![[Linked Image]](https://www.outdoorking-forum.com.au/forum/images/members/mower-monsterw.jpg) Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
|
Joined: Dec 2006
Posts: 2
Novice
|
starter O'ring has been replaced I checked bottom seal it looks ok. i even put a new head gasket on. the little valve on the decompressor has been cleaned and is working .thanks Ja
|
|
|
|
|
Joined: Dec 1999
Posts: 5,395 Likes: 35
Repair Junkie
|
ja, Have you checked that both spring are in the carby (each side of the diaphragm)? Also have you checked that the cap over the diaphragm does not have a crack in it. 
Regards, Bruce Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.
|
|
|
|
These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.
If you have received help, please consider making a donation to support the on-going running cost of these forums.
|
|
|
Forums145
Topics13,058
Posts107,236
Members17,805
| |
Most Online16,069
Sep 19th, 2025
|
|
|
|
|
|
