OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Engines Questions On Victa Two Stroke Engines victa plastic carbys

Hi all,
I have rebuilt dozens of plastic victa carbys but have never really worried about matching parts ect. I am now wondering the viability of this scheme! Have I just been lucky over the time or are all parts interchangeable? I have had some carbys work like new and others that are not quite right. If anyone has a reference list to match body�s and poppet�s ect I would be interested to see it
Thanks allot
Regards jay

Mowernut my understanding of the plastic carbie situation is that the carb body lifter diaphram etc are all the same from the G4 to the Powertorque LM with the main jet poppet valve and diaphram being different between the types. If you are installing a rebuilt LM on a power torque you have to be particually carefull of the poppet valve

I would suggest that you subscribe to the parts list and manuals area of the forum and you will get a lot of technical information there.