Hello has anyone out have parts for the Scott Bonnar 19 (Bonmow) 3g villier (2stroke) or know where I can source parts from currently chasing a fuel tank,carby set up and throttle control for the 3g villier aswell as a catcher for the bonmow it's self (14")
I have a Bonmow 19 with the catcher, I could post some photos of the catcher if that is of help, alternatively I could probably knock up a drawing on CAD for you.
Hello Geoff wow if you could knock up a drawing on CAD that would be awsome my missus is a sheet metalist by trade so she could knock one up. the plan was to find an old one to replicate, but a drawing would do!!.. I've only ever restored 45's this is my first Bonmow. Your an absolute legend mate!! 👍👍
Hi Geoff, I'm restoring a Bonmow 19 but need a catcher. I see you posted some drawings but wanted to see if you had a complete drawing. Thanks for the drawing you already posted as it will give me a starting point. Thanks Chris
Hello Chris, sorry for my late reply, I have not been on the forum for a while and I was cleaning up some emails and found the one asking your question. I will take some photos for you and do a drawing of the brackets that attach the catcher to the mower. Regards Geoff.
Hi Geoff, Sorry for not responding sooner. Ive been off the post for a while. The restoration has come to a standstill as the catcher is the last part. Thanks for the drawings, ill be able to use the old catcher for the catcher hooks. Thanks again, Chris
