Long time between drinks, have got a strange question with a gxv120 I have on a Big Bob
Does anyone happen to know what thread pitch and length a gxv120 uses for the bolt that attaches the filter housing to near the throttle assembly.
The mower is buried in the back of the shed where I can't easily get at it, but I'll need it next week so trying to avoid standing there for 30 minutes trying 101 different bolts from the miscellaneous bolt box.
My recollection is an M6 or M8 bolt slightly longer than the ones holding the recoil on but I could be wrong
Hi Tyler, good to hear from you. I put a 120 on a small mower for a mate of mine and I can ask him to check it if we get stuck. It is a 6mm and from memory about 35mm long and I am guessing it will be the same as on the 160 which I can check for you tomorrow
Thanks, I had at a look this evening at some other parts lists online and eventually found one that listed a size as well as a honda genuine part number. It said exactly the same, 6mm, 35mm so you're right on the money.
