OutdoorKing Repair Forum Forums Repairs and Maintenance Questions on Engines Questions on Other Engines Villiers C25 or 412 Stator plate wanted

Hello,

Would anyone happen to have a stator plate to suit a Villiers C25 or 412, as per the photo attached. I’m looking for a bare stator plate. If you have one you’d be happy to sell, please get in touch. Thanks Jeremy.

Part number is 31360. May be the same as some other models like mk12/2.

Hi Jeremy,
As Paul has just pointed out that you don't need to mount the condenser and the points, as long as you have the coil you could just make a stator plate out of 3mm plate. This way you only have to get 4 holes in the right position, 2 for the coil and 2 to mount the plate

Thanks mate. I probably should clarify that I’m wanting the plate with the outer part (magnet) still riverted on. I’m wanting to send it over to the UK so that I can have it converted to electronic ignition by Villiers Spares. I would like to keep my original plate on my engine for now.

Hi Jeremy, what outer magnet are you talking about, do you mean the coil?

The layered three pronged part that is riverted onto the stator plate. The coil slides over the centre piece.