Hi BB,

This is the link I was talking about. What was the fix?

https://www.outdoorking-forum.com.au/forum/u...er-clutch-something-issue.html#Post89534

I have put it back together as I had to mow the lawns. I had to use the hammer to lightly tap the sleeve on.

I will take it apart again in a few days time and get some photos.

Can you confirm that the sleeve has to be a loose fit so when you pull on the accelerator lever....it then causes the bolt to pull down on the sleeve to engage the clutch/gain more roller speed?

As my sleeve is an interference fit and it doesn�t/won�t move which then doesn�t allow the clutch pad to engage.

I had to push my mower around like a rotary ...

Are you able to measure it with a vernier? I can and we
Can compare sizes....

The alternative is I buy one from the ODK store...

Thanks again for helping.....




Attachments
6110F625-2F7D-46A0-AA45-1A4BC88BC0B6.jpeg (255.58 KB, 34 downloads)
1