Hello members, this is my HD10 greenfield. The mower has had a complete mechanical rebuild replacing almost all of the bearings. The spindles were polished as well as the steering column and both were greased. The oil was replaced and the cutter clutch was resurfaced on a lathe as well as a new starting solenoid as the old one was shot.

The air filter was missing so an oil bath air filter has been fitted until an original one is sourced. I rebuilt the carb as the engine wouldn't idle and was surging. We found a badly damaged jet which was replaced as well and new gaskets were made, now the mower runs well.

The mower has areas that have been repainted as a few of the decals were covered in masking tape but have been cleaned up now also a dozer blade was mounted on the front at one point.

[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]