I have a Honda Harmony HRB215HXA, Engine GXV140K1, which I purchased in 1997, and it starts and runs faithfully after 19 years, but I noticed oil leaking from around the flywheel recently. After pulling the flywheel off, the top oil seal was sitting low (below the outside metal around it). The compartment with the PCV valve was suprisingly clean looking, but the gasket to that compartment looks a little 'rough'. The disc, the mesh, and the drain hole all look fine. I replaced the oil seal around the crankshaft, thinking that would fix the problem, but it still leaks oil around that area. The new oil seal now sits up level to the top of the metal rim outside the crankshaft,and is very tight. My next guess is to replace the gasket. Any other ideas on what this could be?
The mower has never leaked oil out of the bottom onto the floor.
Thank you for any help you can provide.

Last edited by Diane; 07/09/16 10:33 PM.