Hello ballarinerlawns

We don't often get posts on A-V Everymans.

I do not believe anyone stocks parts anymore.
I lost the thread after A-V Power Mowers of North Road,
East Bentleigh took over manufacture of the old Austral Villiers.
The records I have end in the late 1980s. So you will have to
re-manufacture from cork sheet.
Quote
... Or do I undo the Centre nut and extract it as a whole trying to keep it all contained which I don't think will work as I have to remove the old cork.
I suspect the clutch is secured by a stub axle. It may be you
have to put the machine on its side to contain the bearings.

Hope this helps.
------------------------
Jack

[Linked Image]