So things have been getting progressively more and more serious with my back lawn, so much so that I have been on the lookout for an upgrade for my 20" SB45.

I was finding that the SB45 lacks fine adjustments of the front roller assembly, reel to bedknife clearance and rear roller to bedknife parallelism. It isn't the mowers fault, I was asking it to do a task that it was never really intended for. The limitations of the mower show up when you start mowing below 5mm, where the tolerances are very small.

So I found this and picked it up on the weekend. It has been sitting for a few years so I will give it a service and make sure it is all adjusted properly. I've got to say, the engineering on this is unbelievable.

[Linked Image]
[Linked Image]
[Linked Image]