The little end bush is available but requires reaming for a correct fit. I bought my reamer from the UK. If you search the online parts store above and to the left you should find the bush in stock.

Piston pin is NA, perhaps enquire about this

https://www.outdoorking-forum.com.au/index.p...amp;inc_subcat=0&sort=20a&page=1

Bush

https://www.outdoorking-forum.com.au/index.p...amp;inc_subcat=0&sort=20a&page=2

If I can find the reamer on EBay I will post it here, you need to ream the bush to suit the pin after the new bush is fitted to the conrod

Here is the reamer, you will have to check the sizing to be sure it's the right one for the bush.

http://www.ebay.com.au/itm/Engineers-Adjustable-Hand-Reamer-Tools-5-16-11-32-7-9mm-to-8-7mm-HZ-Size-HSS-/400559618868?hash=item5d4336bb34:g:F5oAAOxyHWJSGNVP

Hope all this helps


Last edited by paul_c; 20/12/15 07:15 AM.