In the mean time, try mowing in left hand circles as much as possible.
The first indicator of excessivly work blades is leaving a "mow hawk" when turning right.
As AVB has already noted, Husqvarna do not use tie rod ends on the LT range of mowers.
You should have two drag links from the steering gear, one to each wheel and then a tie rod between the two wheels.
Each one of these rods is simply bent over at the end and slots through a hole secured by a split pin
The YTH & GT"s had tie rod ends so we really need the numbers of the compliance plate which should be under the seat
