yea it was a 27mm
Originally Posted by Buckets
Wiix,

Excellent photo's mate.

Am thinking of tightening the clamp nut on the forward clutch just a bit on my E2000 as I need to put a fair bit of pressure on the forward pedal but the reverse is fine, both corks were changed in Feb 2012) and the drive belt is as tight as.

I was thinking of doing it on the machine, but I don't have the right size open end spanner, do you remember what size socket you are using on that second photo so I can buy the correct size spanner.

Any thing I should keep in mind when doing this?

Regards
Buckets