Thanks Joe, I would be really keen on the 20" if it was available, if I could salvage the clutch, shaft and lever that would really save me some money. The mower was all together when I got it I have stripped it down. Engine is in great cond. My to do list as follows: replace all sprockets and chains, reel adjuster bolts were seized ,all bearings and the clutch.(half should be ok) I don't mind buying new Chain and sprockets as I will be using it myself at home. Chain case cover will clean up ok with a bit of panel beating. Catcher is very rough but I am going to try to reproduce it myself as I am a sheetmetal/welder. I was originally prepared to buy a fully restored mower but I am a sucker for a project.
