I have a Briggs Sprint 375 - model 98902 , my prob is carby related but not as serious as freddy floyds who posted back on 08/11/11 .
Anyway behind the primer there is a tiny little marble that was sitting at the front , the problem then was the primer diaphragm wouldnt pop back out straight away and after 5 or so mins of running under no load (idle) the motor would shut of as if you turned the fuel off !. Now press the primer Diaphragm and it pops back out as it should do normally but when you go and start it it wont start
I pulled the diaphragm off again and had a look in it and the marble has gone down the cylinder where it was sitting at the front before .
So i come to you all for suggestions , advice and help. Im guessing its not totally screwed and there is some hope . Im not too farmilar with 4 strokes , over the years only really played around with 2 stroke carburetors - G4 style , not too sure about my around 4 stroke carburetors.
Thanks in advance , Oh let me know if photos will help.
Cheers
