>You are running the machine with the blade plate >on are you?
Yes
>Have you checked your petrol container for water?
Was completely cleaned - no water
>Did you flush out the tank?
Yes
>Did you clean the carby and the main jet in the >centre?
Cleaned the carby however did not remove main jet to clean the emulsion chamber.
>The spark you have is it blue?
Yes. bright blue
>Did you check the bottom seal for leaks?
I will check ... am I just looking for weeping?
>If you check these first and it still doesn't go >then move to the next thing to check.
>Undo the four bolts holding the cylinder to the >crank case and remove the cylinder.
>Then take the piston ring off and put it in the >cylinder to see what ring gap you have also look >for scoring in the cylinder. [Wave]
Will let you know
Thankyou
James
