Dear all,
I got a newish Talon Eagle Classic whipper snipper that was not working and was leaking petrol from the carby.
After replacing all gaskets (the original carby appears to be a cheap Chinese copy of a Walbro WJL series) the carby doesn�t leak anymore, but the engine still it doesn�t work.
Since I couldn�t find a parts diagram of the Chinese carby (surprise, surprise!), I downloaded a Walbro parts diagram.
Although the Talon carby is obviously a Walbro-replica, there is something that I don�t understand.
The Walbro is supposed to have gasket-plate, plate-pump, diaphragm pump and gasket-pump. The gasket plate and plate-pump are missing in my carby.
Is this correct or the previous owner tried to fix it and forgot to put back in place the gasket plate and plate-pump?
Also, below the lever-metering, there is a brass orifice whit a small plastic membrane (say 2.5mm Dia). When cleaning the carby I broke this tiny membrane, but I don�t understand what it is for because Walbro doesn�t have it.
Can anyone help?
Thanks!
