I've got nothing here that has the same sort of edging here.See that would be the hardest part,getting the edge to look and be the same.I mean sure you could get a flat piece of alloy welded in but there's a raised lip at the bottom,then I guess it would have to be bogged up.Then the problem would be a slight pump in that part and the bog (Body filler) would either have a mark or fall off.So really need something similar to start with.It's ok the guys I use at Fyswick are very good with alloy.The last place I worked for we got them to make from scratch an alloy bull-bar for the truck I use to drive.[Censored] excellent job it was.So I'm sure they can handle a mower base.
