My dad has one of these.
[Linked Image from timsrideonmowers.com.au]

Rover Ranger XC with an 11Hp briggs.

He bent the steering and what not and its sat in the shed for a few years pulled apart.

I put it back together but there is still an issue with the deck height adjustment.
If you grab the bar and pull it up it gets to about 6 before anything happens. So its really lifting to position 2, not high enough, keeps biting dirt.

Theres a shaft that the height lever is on, on the other end of it is a boss with a roll pin through it, on the boss is lever that goes to the deck. The roll pin is there, but there is movement between the two. Does the roll pin wear the shaft out???


I just thought i would ask if this was a common problem.

I would assume that with the roll pin removed the shaft with just pull out??


I am waiting for my Dad to get back to me with the model number etc off the machine before i look into chasing up the parts. Well once i know what parts i need.

Thanks, Bob.