hi everyone i have a whites L115 ride on. i have two problems with it. the first is when you push the clutch in it keeps driving, nearly stops but just enough to make it hard to select a gear or disengage a gear. i notice it has a disc brake type set up on the outer gearbox that works when you press the clutch in. could some one tell me if there is an an adjustment there or is there some other adjustment. The second problem is when you raise the cutting deck right up the blades wont disengauge. it looks like there are small brake pads on each bearing on the deck and when you raise it the pads contact the bearing but i'm not sure if i am right or not. can some one please give me some imfo on it all. thanks micka
