No probs Deejay.
I sourced some wheels and tires off a good mate I know on another forum. I used two of his wheels two of the wheels that were on the mower and 4 tires from my mate. They are not new, they would be 50 + years old. The original wheels and tires are still useable as well. I was lucky as these you can not buy new anywhere.
The badge I got off ebay for $58 and is an original early one off an model 1 or similar. I painted it myself. I was lucky to get this for only $58! I was watching some for a while.
No sand blasting for all the steel parts, (I did get my model 2 base sand blasted, I will post pics soon) I used electrolysis, all though this takes a while it costs almost nothing and easy to do at home, you will need a wire brush on a bench grinder or something similar though.
Paint is three coats of etch primer, and three coats of top coat, (deep brunswick green) all out of a presure pack.
