G'day AMP and Norm,

The problem with Rover blades is they are straight and from memory these 1971 Victa blades are on the top side of the blade plate
and are bent so they straighten horizontal to the ground.

I have a plate below that someone has fitted the Rover blades and the angle is wrong.

Usually I just find what ever works from the spares I have ,If the later Victa plate fits the crank hub then that is the easiest to fit.

From memory the Scott Bonnar 520 720 blades are a close match ,but you would need to check them.

https://www.outdoorking.com.au/lawn...r-catcher-models-520-720-a5001328-bld301

I've seen people just drill a generic blade plate centre out the same size as the Victa to use different blades.

Cheers
Max.

Attachments
Rover B &.jpg (122.81 KB, 34 downloads)
plate.jpg (242.04 KB, 34 downloads)
Victa Plate a.jpg (364.02 KB, 35 downloads)
Scott Bonnar Blades Rear Catcher Models 520 & 720 A5001328 BLD301 DUNBLD301 - $7.00.jpg (89.32 KB, 34 downloads)