Hi Max,
I am still 2 blade carriers short at the moment to fix what I have here and the other plates I will have to get made up is the sliding plate the F/C's mount on and I can also use them for the PT's with a couple of small modifications, I will try and avoid fitting PT's to them because I also have to make up the weight to bolt onto the crank to stop the kickback. All takes a lot of hours but my aim is to have at least half a dozen ready for next September/ October. Should keep me busy over winter.
I also need a couple of belts for them as well.

Last edited by NormK; 31/03/23 07:08 PM.