What I will try now is file and polish 5 primer caps and with a carby that I know is working properly fit the 5 primer caps and needles and see what results I get with each one. Then I will keep each set in individual containers so I can then fit them to carbys as I need and see if they work after sitting for some time. Very tiring but I have to do this before I commit to picking up another 30 motors. If they don't work I am done with them

Entire Thread
Subject	Posted By	Posted
Varietech First Victa LM G4 Needle Lever Prototype	thecarbymaster	18/10/21 01:39 AM
Re: Varietech First Victa LM G4 Needle Lever Prototype	NormK	18/10/21 03:32 AM
Re: Varietech First Victa LM G4 Needle Lever Prototype	Tyler	20/10/21 03:28 PM
Re: Varietech First Victa LM G4 Needle Lever Prototype	thecarbymaster	17/11/21 12:25 AM
Re: Varietech First Victa LM G4 Needle Lever Prototype	NormK	14/02/22 03:41 AM
Re: Varietech First Victa LM G4 Needle Lever Prototype	thecarbymaster	18/02/22 12:33 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	09/05/22 01:27 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	09/05/22 07:35 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	31/08/22 09:58 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	01/09/22 09:44 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Tyler	01/09/22 03:27 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	08/09/22 02:58 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	08/09/22 08:06 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	08/09/22 09:00 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Mowerfreak	12/09/22 08:43 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	12/09/22 10:44 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	12/09/22 12:02 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Mowerfreak	12/09/22 01:58 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	12/09/22 11:02 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Mowerfreak	13/09/22 12:36 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	13/09/22 12:54 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	13/09/22 10:28 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	13/09/22 12:58 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	13/09/22 12:07 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	13/09/22 01:13 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	13/09/22 11:34 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Mowerfreak	14/09/22 03:09 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	14/09/22 04:23 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	14/09/22 12:47 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	14/09/22 11:53 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	15/09/22 04:06 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Tyler	15/09/22 04:00 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	16/09/22 07:08 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	23/09/22 04:42 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	28/09/22 04:33 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	28/09/22 06:04 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	28/09/22 08:02 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	28/09/22 08:36 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	28/09/22 09:28 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	28/09/22 09:41 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	28/09/22 10:02 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	28/09/22 11:19 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	29/09/22 12:47 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	29/09/22 08:45 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	29/09/22 12:33 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	29/09/22 10:06 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	29/09/22 01:04 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	29/09/22 11:28 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	30/09/22 02:30 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	30/09/22 02:39 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	30/09/22 03:00 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	30/09/22 03:27 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	30/09/22 07:45 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Mowerfreak	30/09/22 08:11 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	30/09/22 09:41 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	30/09/22 02:00 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	01/10/22 12:42 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	01/10/22 05:14 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Mowerfreak	01/10/22 06:33 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	01/10/22 12:14 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Mowerfreak	01/10/22 03:42 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	02/10/22 11:33 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Ironbark	02/10/22 04:16 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	03/10/22 07:43 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	03/10/22 08:29 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	thecarbymaster	03/10/22 12:15 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	03/10/22 02:22 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	03/10/22 10:21 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Ironbark	05/10/22 12:17 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Mowerfreak	05/10/22 08:00 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	05/10/22 08:44 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Mowerfreak	05/10/22 09:13 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Tyler	08/10/22 03:01 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	09/10/22 12:58 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Tyler	09/10/22 02:46 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	09/10/22 06:53 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Tyler	09/10/22 12:19 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	09/10/22 10:35 PM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Tyler	10/10/22 01:23 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	NormK	11/10/22 09:51 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	Tyler	11/10/22 10:50 AM
Re: [Censored] First Victa LM G4 Needle Lever Prototype	maxwestern	14/10/22 06:55 AM

Moderated by bigted, Bruce, CyberJack, Gadge, Mr Davis

Link Copied to Clipboard

Forum Donation

These Outdoorking Forums have helped Thousands of people in finding answers to their equipment questions.

If you have received help, please consider making a donation to support the on-going running cost of these forums.

September
M	T	W	T	F	S	S
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30

ShoutChat

Comment Guidelines: Do post respectful and insightful comments. Don't flame, hate, spam.

Newest Members

Flano, mattyj, Markp88, Fearless Prophet, Deejos90
17,577 Registered Users

Forum Statistics

Forums145

Topics12,992

Posts106,837

Members17,578

Most Online14,275
08:44 PM

OutdoorKing Showcase

20 Bucks from FB Marketplace
by Return Rider, February 20

Victa Cortina 2 Shed Find
by Return Rider, January 25

My Rover Baron 45
by Maxwell_Rover_Baron, April 16

SHOWCASE - Precision Mowers - 2021
by CyberJack, April 14

SHOWCASE – Atco Rotary – Paul C - 2020
by CyberJack, December 28

HOME |CONTACT US

Responsive Width:

PHP: 8.3.24 Page Time: 0.108s Queries: 18 (0.100s) Memory: 0.7855 MB (Peak: 0.8025 MB) Data Comp: Zlib Server Time: 2025-09-12 05:38:26 UTC
Valid HTML 5 and Valid CSS