Victa Pro550 in Riverina, South Australia

No, catcher flap is fair. I'm talking about a rear chute attachment for these bases that directs the clippings sideways (left).

PS mower concerned and the attachment. I'm replacing the front axle as the one on it had a worn hole where the linkage goes in, causing severe play. The mounting points of the base are fine.

Attachments

IMG_20220419_202914_copy_960x542.jpg (44.25 KB, 47 downloads)

IMG_20220419_202940_copy_960x542_1.jpg (67.02 KB, 47 downloads)

Last edited by Mowerfreak; 19/04/22 08:35 PM.

Ahh, if only victa had kept producing the thumblatch catcher series, they would be in better shape today!

Entire Thread
Subject	Posted By	Posted
Victa Pro550 in Riverina, South Australia	Ironbark	19/04/22 03:08 AM
Re: Victa Pro550 in Riverina, South Australia	mich	19/04/22 05:44 AM
Re: Victa Pro550 in Riverina, South Australia	Ironbark	19/04/22 06:32 AM
Re: Victa Pro550 in Riverina, South Australia	NormK	19/04/22 06:40 AM
Re: Victa Pro550 in Riverina, South Australia	Ironbark	19/04/22 06:50 AM
Re: Victa Pro550 in Riverina, South Australia	Mowerfreak	19/04/22 07:20 AM
Re: Victa Pro550 in Riverina, South Australia	NormK	19/04/22 08:27 AM
Re: Victa Pro550 in Riverina, South Australia	Mowerfreak	19/04/22 08:55 AM
Re: Victa Pro550 in Riverina, South Australia	NormK	19/04/22 09:54 AM
Re: Victa Pro550 in Riverina, South Australia	Mowerfreak	19/04/22 10:05 AM
Re: Victa Pro550 in Riverina, South Australia	NormK	19/04/22 10:16 AM
Re: Victa Pro550 in Riverina, South Australia	Mowerfreak	19/04/22 10:24 AM
Re: Victa Pro550 in Riverina, South Australia	Ironbark	20/04/22 11:13 AM
Re: Victa Pro550 in Riverina, South Australia	Mowerfreak	20/04/22 11:43 AM
Re: Victa Pro550 in Riverina, South Australia	Ironbark	20/04/22 03:34 PM
Re: Victa Pro550 in Riverina, South Australia	Mowerfreak	20/04/22 03:56 PM