Originally Posted by dristo72
Hi Bruce, the mower has 2 springs
both connected through the thick wire eyelet wire that connects the govenor arm to the throttle valve arm and attached to the plate that shorts out the earth wire. do i bend the plate on the side with the short out wire or the actual wire with the eylet?
Thanks

The one that has the larger hole (longer spring) in it is the one that will increase the high speed rev's the other one is the idle speed. cheers2

Regards,
[Linked Image]

Bruce


Please do not PM me asking for support. Post on the forums as it helps all members not just the individual.