Good Afternoon ODK Members,

I have been working on this pair of 56 Ogden reel mowers for a while now, one is mine and one is a mates. Mine has the white tank strap, it had a good engine and I just had to service the magneto and carb. The other one had its engine stripped down and bearings and seals replaced. Runs nicely, fitted a new belt to it and mowed the front yard. Both will now be stripped and repainted.

Not an easy job to fit a new belt, engine comes off and then you disassemble the belt side of the mower frame. May as well keep going and service all the bearings and grind the reel.

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

[Linked Image]

I will update this thread when I strip mine down for its repaint 😀

Attachments
0628A4E5-270C-4658-8450-2C6E332DCAF9.jpeg (701.85 KB, 108 downloads)
012A35E7-FF4C-436E-9D75-C3DFFBD5EC7A.jpeg (572.85 KB, 106 downloads)
DF0CB678-5495-4029-8E42-B1C2BCEB4870.jpeg (573.39 KB, 107 downloads)
C0594479-E6B7-481F-8752-94133CDEF4F5.jpeg (570.47 KB, 105 downloads)
1DAA81D5-C40C-4BFF-919A-4508D78851E0.jpeg (516.09 KB, 108 downloads)
1D415671-6E97-476A-9BC6-6351D688C461.jpeg (336.44 KB, 107 downloads)
Last edited by paul_c; 04/04/20 04:46 PM.