Hi Mf and Norm,

Here are some pics of my Utility just for comparing where the blades sit.

This is the mower I put the steel needle in the carby.

It should be OK Mf with the blade plate you are using and the spacers on the motor.

Cheers
Max.

Attachments
Z 1 Back.JPG (110.2 KB, 185 downloads)
Z 1Front.JPG (101.63 KB, 183 downloads)
Z 1 Side.JPG (146.37 KB, 182 downloads)
Z 1Mower.JPG (180.45 KB, 182 downloads)