Petrol Chainsaws and Concrete Cutters https://outdoorking-forum.com.au/forum/ubbthreads.php?ubb=cfrm Recent Topics en-us Sun, 26 Jul 2026 17:26:26 UTC 5 support@outdoorking-forum.com.au (OutdoorKing Repair Forum) UBB.threads https://outdoorking-forum.com.au/forum/images/general/default/rss_icon.gif Petrol Chainsaws and Concrete Cutters https://outdoorking-forum.com.au/forum/ubbthreads.php?ubb=cfrm fuel tank grommet for baumr sx62 https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/121674.html#Post121674
If you look on eBay or google ( fuel tank grommet for baumr sx62 chainsaw ) you should
be able to find some fuel line with a grommet built in or use a grommet with two holes and just block
the hole you don't need.

If you buy the fuel line with a grommet built in you may need to message the seller first to find out if
it fits a 19 mm hole.

Cheers
Max.

]]> Mon, 11 Aug 2025 10:54:35 +0000 maxwestern https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/121674.html#Post121674 chain bumper guides for Baumr https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/119841.html#Post119841
If you can't find the guides for sale you may be able to shape some up from some nylon ,a cheap white nylon chopping
board is about $10. or less.

The side brake handle cover with guide is available on eBay for $20. with free post.


Cheers
Max.

]]> Wed, 16 Oct 2024 07:51:28 +0000 maxwestern https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/119841.html#Post119841 Husqvarna Rancher 50 Oil Vent https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/119562.html#Post119562
]]> Fri, 07 Jun 2024 03:05:41 +0000 MowingManiac https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/119562.html#Post119562 some stihl manuals https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/117935.html#Post117935 http://thebakeliteradio.com/sawspares.com/page10/page10.html

for my part, completed my 15th rebuild in as many years. I decided on the 310/039 to go back to the standard cylinder, it is not worth the trials and errors with the decompression ports. no point in writing a 2000 word essay here on my trials and tribulations. by golly I could draw all the parts by now, blindfolded.

]]> Wed, 05 Apr 2023 07:38:13 +0000 petergrass https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/117935.html#Post117935 Stihl Chainsaw https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/118038.html#Post118038 turned out somehow to be the fuel line, the line in it was not transparent and I got suspicious when I blew air into it and then fuel spurted out from around the hole. so I decided to replace it with one that transparent, so I could see what was happening (it would cough start with some petrol medicine thrown down the carby manually).
I used the same orange transparent line 6mm as brushcutters use but first I drilled a hole out of where the line was coming out of.
drilled a hole and put a rubber gromet in (a bit dodgy as the depth of the hole is greater than the inner part of the gromet.
then I could see the fuel progress down the line.
there were no gromets there before (it might have been messed with), just a hole.
also had to modify the replacement carby and take out the choke lever, just put a couple of screws into the holes.
if I have issues with my gromet I might put a large grub screw in, and bore a hole with a smaller inner diameter in the middle to take a gromet.
just a guess but maybe someone thought to put a grub screw in the line to limit the fuel . I had this one catch fire twice, which I think was incorrect original carby kit I put in. but at least I knew the petrol was good, lol.

]]> Mon, 17 Apr 2023 01:47:31 +0000 petergrass https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/118038.html#Post118038 He says it runs when it is cold https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/117321.html#Post117321
Originally Posted by NormK
Another one dropped off last night, , he says it will run when it is cold but once it heats up it won't start again. I haven't seen it running so I have my doubts. I'm always a bit sceptical with this bloke because he stretches the truth a lot so everything he says I take with a grain of salt. Any thoughts
Just call it as it been straight gassed.

]]> Fri, 13 Jan 2023 07:50:16 +0000 AVB https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/117321.html#Post117321 opinions and advice on 2 chainsaws. https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/117214.html#Post117214
]]> Tue, 03 Jan 2023 01:28:18 +0000 maxwestern https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/117214.html#Post117214 Concrete saw https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/116841.html#Post116841 Many years later Aldi offered one with a much thinner end for a similar price!

]]> Sun, 27 Nov 2022 13:57:31 +0000 Mowerfreak https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/116841.html#Post116841 jonsered leaking fuel https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/116113.html#Post116113 speedy

]]> Wed, 24 Aug 2022 20:45:53 +0000 speedy https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/116113.html#Post116113 Poulan chainsaw https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/115232.html#Post115232 The diagram sorted it out, choke mechanism fouls on the air filter so a bit of heat on it should sort that out .
Thanks again

]]> Tue, 03 May 2022 02:43:32 +0000 NormK https://outdoorking-forum.com.au/forum/ubbthreads.php/topics/115232.html#Post115232